If you are looking for how to connect jiofi to pc, then read this article. I am just sharing my experience in order to help you with this question. When I tried to connect JioFi to my computer using a wireless adapter, I was getting errors every time. Sometimes it would work and sometimes not. But after reading few articles and watching some videos, I learned how to connect JioFi to PC.

Jiofi.Local.Html is entirely useful to know, many guides online will acquit yourself you very nearly Jiofi.Local.Html, however i recommend you checking this Jiofi.Local.Html . I used this a couple of months ago bearing in mind i was searching upon google for Jiofi.Local.Html

 

First, I tried to connect to my computer using the Wireless adapter but the connection was quite weak. It worked for a while but then stopped working. Then I tried to use the standard method of connecting by using the password and username.

 

The standard way of how to connect wifi to be is to use windows password and username. After inputting the information, I was able to successfully connect to my computer. Then I tried the same method as before with the wireless adapter but that also failed. Then I came to know about the wp's method.

How to Connect JIOFi To PC Wireless Network

 

This method of how to connect wifi to pc requires a wired connection. The next step is to connect the Jiofi device into the USB port of your computer. In my case, my Jiofa did not have any port. So I had to make a hole in my desktop. You need to make sure that the device has a way for plugging into the USB port otherwise you will not be able to see it in the BIOS.

Must check - Ipv6 Significance

 

After this, you need to connect your PC to the Jiofi device via USB and then run the installer software. Now, after the installation is completed, you should see your computer in the output monitor and you should also see the SSID (this is the unique name of your network) as shown in your output. Now you are at the point where you can now enter the username and password. If you are using the standard mode, then you would have to put "iwifi connection" in the command field and then press "enter".

 

The standard mode is one of the easiest ways of how to connect wifi to pc. In this case, you would have to connect your pc to the jiofia device through the USB port. Then run the installer software and then let it copy the drivers (for the wlan card and then for the wifi device) onto the memory of your computer. You would need to reboot your computer. For the wlan adapter, you would have to click on "scan" and then follow the scan results. After rebooting, you will get a list of drivers and you can install all the drivers one by one.

 

However, if you are using the normal method of how to connect wifi to pc, then you may have to configure your wireless router to configure your access point and connect your wifi device to it. It is advisable that you use the standard option in this case. If you want to know how to connect wifi to pc with wired connection, then you would have to go to the main menu of your router (usually called "Internet connection settings") and then click "wireless". You will need to enter the password and then click "OK".

 

The last step is to find the location of your way button. Then you can simply press the "wps button" and you will have to wait for the device to appear on the wireless network. Your router will provide you with a key for entering your password in case you forgot it during the installation process of your wifi device.

Thanks for checking this article, If you want to read more articles about how to connect jiofi to pc do check our blog - Fcoint We try to write our site every week